S3XY Dash StealthMount for Tesla Model Y Juniper Standard & Premium – US Shipping Included

The VANKIT StealthMount positions your S3XY Dash behind the steering wheel while keeping the mount itself discreet. Specifically designed for the dashboard contour of the Tesla Model Y Juniper Standard and Premium, it keeps the air vent clear, the S3XY LED strip visible and steering wheel adjustment available.

US version: designed by VANKIT in Germany, made to order and shipped from the USA. Standard US shipping is included.

IMPORTANT BEFORE ORDERING

• Includes one StealthMount and three black screw caps: two for installation and one spare.
• Adhesive tape is not included. The recess fits gray 3M VHB GPH-110GF, 19 × 45 × 1.1 mm.
• You can use the spare adhesive pad supplied with your S3XY Dash if it matches these specifications. Otherwise, purchase the tape separately and cut it to fit.
• Your original S3XY Dash magnetic holder and mounting hardware are required and reused.
• The S3XY Dash display, magnetic holder, LED strip, cable and mounting hardware are not included.

INSTALLATION VIDEO

The video demonstrates installation. This US version is supplied without adhesive tape; prepare a suitable pad before installation.

VIRTUALLY INVISIBLE INTEGRATION

The mount sits deep inside the opening behind the steering wheel and follows the existing dashboard contour. From a normal driving position, very little of the mount is visible, creating a clean installation that complements the minimalist Tesla interior.

PROFILE ENGAGEMENT WITH ADDITIONAL ADHESIVE FIXATION

The StealthMount uses the shape of the dashboard for mechanical support rather than relying solely on adhesive. Its upper section engages with the existing dashboard edge, while the lower section rests against the corresponding profile.

An integrated recess accommodates a gray 3M VHB GPH-110GF adhesive pad measuring 19 × 45 mm and 1.1 mm thick for additional fixation. The spare pad supplied with your S3XY Dash can be used if it matches these specifications. No adhesive pad or tape is included with this mount.

Before applying tape, make sure the contact surfaces are clean, dry and free of grease. Follow the tape manufacturer’s instructions for surface compatibility, application temperature and bonding time.

CLEAN FINISH WITH THREE SCREW CAPS

Matching black caps conceal the screw openings for a neat finish. Each set includes two caps for installation and one spare. The caps can be removed when access to the mounting hardware is required. Handle them carefully during removal to avoid damage.

AIR VENT AND S3XY LED STRIP STAY CLEAR

The mounting position keeps the Dash clear of the air vent opening. When used with the optional S3XY LED strip, the display sits below the light line so the strip remains visible. The LED strip is not included.

COMFORTABLE VIEWING AND STEERING WHEEL ADJUSTMENT

The Dash sits in front of the driver with space between the display and steering wheel. The original magnetic holder allows you to adjust the display angle to suit your seating position.

Because the mount attaches to the dashboard rather than the steering wheel or steering column, the display stays in position when you adjust the wheel. After installation, check clearance throughout your preferred steering wheel adjustment range before driving.

INTEGRATED HIDDEN CABLE ROUTING

An integrated cable guide allows the USB cable to pass behind the display and be routed discreetly toward the dashboard trim, keeping visible wiring around the mount to a minimum.

USES YOUR ORIGINAL S3XY MAGNETIC HOLDER

The original S3XY Dash magnetic holder fits into the StealthMount. Reuse your existing holder and mounting hardware, then fit the included black screw caps. The magnetic attachment and display angle adjustment remain available.

COMPATIBILITY

• Tesla Model Y Juniper Standard
• Tesla Model Y Juniper Premium

Compatibility with other models, trims or dashboard configurations has not been confirmed. Please compare the product photos with your vehicle before ordering. Contact VANKIT if you are unsure about fitment.

PACKAGE CONTENTS

• 1 × VANKIT StealthMount
• 3 × matching black screw caps, including one spare

Not included: adhesive tape, S3XY Dash display, original magnetic holder, screws, nuts, LED strip, USB cable or other pictured accessories. Your original magnetic holder and mounting hardware are reused.

MATERIAL AND MANUFACTURING

• Material: Bambu Lab PETG Basic
• Color: black
• Manufacturing method: FDM 3D printing
• Design: VANKIT, Germany
• Production and dispatch: USA

Fine layer lines and slight surface variations are normal characteristics of FDM 3D printing. The surface is not identical to an injection-molded part.

PRODUCTION AND US SHIPPING

Your set is made to order by our production partner Printie in Brooksville, Florida, and shipped from the USA. This version is intended for delivery to US addresses. Standard US shipping is included in the product price.

ORDER ISSUES AND RETURNS

If your order arrives damaged, incomplete or incorrect, or you experience a fitment problem, please contact VANKIT with your order details and, where possible, clear photos so we can investigate and arrange an appropriate solution.

Please refer to our shop’s return policy for the applicable conditions. Contact VANKIT for return instructions and the correct address before sending an item back. Please do not send returns directly to the production partner without prior agreement. Your statutory rights remain unaffected.